Marlin ULTRA PE Line Red
- Pickup from New Mail
- New Mail Courier
- Pickup from the store
- Other transport services
- Cash upon receipt
- Bank transfer
- Privat 24
- WebMoney
Marlin Ultra PE (Marlin Ultra PE) line is an extra strong braided cord made from Ultra-high molecular weight polyethylene/UHMW PE fibers.
UHMW PE fibers, better known by the brand name Dyneema, is an ultra-high molecular weight polyethylene with an extremely high molecular weight, making it a distinctive abrasion resistant and versatile cord.
Advantages of Marlin Ultra PE line made from UHMW PE fibers:
- extremely abrasion, scuff and cut resistant;
- finish polishing ensures a low coefficient of friction;
- virtually "zero" stretch - less than 1.5%;
- hygroscopicity, practically does not absorb water;
- no memory effect;
- high resistance to UV, oils, and other aggressive substances;
- high frost resistance;
- high breaking load.
Marlin Ultra PE line is available in different diameters with different breaking load:
- 1.5 mm - breaking load 104 kg;
- 1.7 mm - breaking load 126 kg;
- 2 mm - breaking load 132 kg.
Marlin Ultra PE line is produced in colors: green, yellow, red.
Features:
- extremely abrasion, scuff and cut resistant;
- finish polishing provides low coefficient of friction;
- virtually "zero" stretchability - less than 1.5%;
- hygroscopicity, practically does not absorb water;
- no memory effect;
- high resistance to UV, oils, and other aggressive substances;
- high frost resistance;
- high breaking load.
-
Accessory type:Line
-
Material:UHMW PE
-
Diameter (mm):2,0 , 1.5 , 1.7
-
Color:Red
In order to repair a neoprene product you need to prepare it.
With a cut it's easy! Let's see if there is any burrs on the ends that are going to be docked, glued. If there are any, they must be removed with scissors. (TIP: When cutting with scissors, try to make a long, non-tearing cut, so there would be no burrs) The flatter the plane of the parts to be glued, the stronger will be the glue. Apply a thin layer of glue for neoprene on the joints, spread it thoroughly over the surface (you can use a match or a plastic wand). Do not glue! Wait 3-4 minutes. Then connect and with a little effort squeeze the edges.
